ADORBOND CC - the biocompatible cobalt-chromium-based non-precious metal fusing alloy
ADORBOND® CC Blank is a dental cobalt-based metal-ceramic alloy. ADORBOND® CC Blank is free of nickel, cadmium, beryllium and lead and complies with EN ISO 22674 type 4 for applications with thin cross-sections that are exposed to very high forces, e.g. removable partial dentures, clasps, thin veneered single crowns, fixed full arch dentures or bridges with small cross-sections, bars, attachments and implant-supported superstructures.
- Biocompatibility
- Free from nickel, beryllium and gallium
- Good for drilling, milling and polishing due to low hardness
- Especially suitable for Primary Situations
- CE- Certified
- Depending on the ceramic, no cooling phase is necessary
| Technical features | ||||
| E-modulus | 210 Gpa | |||
| Elongation at break | 10 % | |||
| Density | 8.3 g/cm3 | |||
| Melting interval Ts-Tl | 1304-1369 °C | |||
| 0.2-% Yield strength Rp 0.2 | 490 MPa | |||
| Highest recommended firing temperature | 980 °C | |||
| Coefficient of expansion 25-500 °C | 13,9 | |||
| Coefficient of expansion 20-600 °C | 14,0 | |||
ADORBOND BC - the clinically proven biocompatible non-precious metal-ceramic alloy based on cobalt-chromium.
| Technical features | ||||
| E-modulus | 195 Gpa | |||
| Elongation at break | 8 % | |||
| Density | 8.4 g/cm3 | |||
| Melting interval Ts-Tl | 1310-1400 °C | |||
| 0.2-% Yield strength Rp 0.2 | 400 MPa | |||
| Highest recommended firing temperature | 980 °C | |||
| Coefficient of expansion 25-500 °C | 14,1 | |||
| Coefficient of expansion 20-600 °C | 14,4 | |||
ADORBOND® BC Blank is a dental cobalt-based metal-ceramic alloy. ADORBOND® BC Blank is free of nickel, cadmium, beryllium and lead and complies with EN ISO 22674 type 4 for applications with thin cross-sections that are exposed to very high forces, e.g. removable partial dentures, clasps, thin veneered single crowns, fixed full arch dentures or bridges with small cross-sections, bars, attachments and implant-supported superstructures.
- Biocompatibility
- Free from nickel, beryllium and gallium
- Good for drilling, milling and polishing due to low hardness
- Especially suitable for Primary Situations
- CE- Certified
- Depending on the ceramic, no cooling phase is necessary
Need Advice ?
Either fill out our contact form and we will get back to you as soon as possible, or contact our customer service department at:
- 02103 9866 30
- 02103 9866 50
- [email protected]