Description
- ADORBOND CC Plus Powder 10-30 μm is a cobalt-based dental metal-ceramic alloy in the form of dental powder. ADORBOND® CC PLUS Powder 10-30 μm is free of nickel, cadmium, beryllium and lead and complies with EN ISO 22674 type 5 for applications with thin cross-sections that are exposed to very high forces, e.g. removable partial dentures, clasps, thin veneered single crowns, fixed full arch dentures or bridges with small cross-sections, bars, attachments and implant-supported superstructures. ADORBOND® CC PLUS Powder 10-30 μm can be used both as a model casting alloy and as a metal-ceramic alloy.
Composition | Technical specifications (normative index) | |||
(mass fraction-%) | Density (g/cm3) | 8,2 | ||
Cobalt | 63,6 | Vickers hardness (HV 10) | 520 | |
Chrome | 24,8 | CTE (coefficient of thermal expansion) | ||
Molybdenum | 5,0 | 25 - 500 °C (10-6 K-1) | 14,3 | |
Tungsten | 5,5 | 20 - 600 °C (10-6 K-1) | 14,5 | |
Silicon | 1,1 | Melting interval (°C) | 1.360 - 1.420 | |
Fe, Mn, Nb | <1% | Highest recommended firing temperature TBr,max | 980 | |
Yield strength (MPa) | 1020 | |||
Elastic modulus (N/mm2) | 275 | |||
Elongation at break A5 (%) | 5 |
Safety instructions
Metal dust is harmful to health! Avoid dust formation and inhalation of the powder! Use suction when handling the powder, working out and blasting. Wearing of tight-fitting safety goggles, protective gloves, FFP3 respirator and protective clothing is recommended. Observe safety data sheet. Hypersensitivities to components of the alloy must be taken into account. In case of suspected incompatibilities to individual elements of this alloy, it should not be used.
Warranty
These technical application recommendations are based on our own tests and experience and can therefore only be regarded as guidelines. The dentist or dental assistent himself is responsible for the correct application of the product.
Instruction manual
ADORBOND CC PLUS Powder (10/30) Download
Reviews
There are no reviews yet.